RDK is an open source code project distributed through industry standard open source licenses e.g. Apache 2.0.

Basic skills expected

Basic skills needed by a user to use the current documentation

• Basic knowledge of Ubundu

• Basic Build knowledge

• Basic RDK knowledge

• Basic knowledge of using a Raspberry Pi boxes (If trying in Raspberry Pi)

• Basic knowledge of how to perform flashing and bring up a Raspberry Pi setup

• Skills to connect and bring up Reference Board (If trying with Reference Board)

Basic Skills

Though not mandatory, the below skills will help the user to understand RDK, RDK build, and to try out RDK better :

• Familiar with Linux based platforms
• Familiar with Yocto
• Familiar with RDK basics
• Knowledge in using Raspberry Pi
• Experience in setting up boards

Relevant RDK links

Hardware requirements and setting up the host environment and Downloading Source Code is explained below.

Setting up the Host Environment

Prerequisites

Prerequisites

Install the following packages for setting up the host VM

The instructions provided below are meant to be executed via the command line on an Ubuntu machine

Host Setup

Install the following packages for setting up your host VM

The instructions provided below are meant to be executed via the command line on an Ubuntu machine

# essential packages installation
# super user mode is required

# major essential packages

# essential packages installation
# super user mode is required
 
# major essential packages
sudo apt-get install gawk wget git-core diffstat unzip texinfo gcc-multilib g++-multilib build-essential chrpath socat bison curl
# supportivecpio packages
sudopython3 aptpython3-getpip installpython3-pexpect libfile-slurp-perl libncurses-dev autoconf flex doxygen libtool automake libpcre3-dev zlib1g-dev libbz2-dev subversion minicom putty libssl-dev rpm python-pexpect python-svn python-argparse vim tofrodos meld dos2unix cmake uuid-dev ruby transfig libglib2.0-dev xutils-dev lynx-cur gperf autopoint python-dulwich python-dev openjdk-7-jre

Note : Please note openjdk-7-jre package is not available for Ubuntu-16.04 anymore. Presumably openjdk-8-jre should be used instead.

# essential packages installation
# super user mode is required
 
# major essential packages
sudo apt-get install gawk wget git-core diffstat unzip texinfo gcc-multilib g++-multilib build-essential chrpath socat bison curl cpio python3 python3-pip python3-pexpect xz-utils debianutils iputils-ping python3-git python3-jinja2 libegl1-mesa libsdl1.2-dev pylint3 xterm

Configure bash as default command interpreter for shell scripts

sudo dpkg-reconfigure dash

Select “No”
To choose bash, when the prompt asks if you want to use dash as the default system shell - select “No”

Configure Git

Upgrade your Git version to 1.8.x or higher

On Ubuntu 16.04 LTS, if you are unable to upgrade your git version using apt-get, then follow the below steps in order to upgrade 

sudo apt-get install python-software-properties
sudo add-apt-repository ppa:git-core/ppa
sudo apt-get update
sudo apt-get install git

Once git is installed, configure your name and email using the below commands

# review your existing configuration
git config --list --show-origin
 
# configure user name and email address
git config --global user.name "John Doe"
git config --global user.email johndoe@example.com
 
# configure git cookies. Needed for Gerrit to only contact the LDAP backend once.
git config --global http.cookieFile /tmp/gitcookie.txt
git config --global http.saveCookies true

Configure repo

In order to use Yocto build system, first you need to make sure that repo is properly installed on the machine:

# create a bin directory
mkdir ~/bin
export PATH=~/bin:$PATH
 
# Download the repo tool and ensure that it is executable
curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
chmod a+x ~/bin/repo

Trivia : Repo is a repository management tool that is built on top of Git. Its main purpose is to help manage projects that consist of many Git repositories, it can also be used to manage uploads to the CMF Gerrit instance and automate aspects of the development workflow.

Repo does not replace Git, it simply aids management of projects that contain multiple Git repositories into a single local working directory. Git will still be used for local operation such as commits etc.

Repo manages this for you by means of an XML based Manifest file. The Manifest file defines which repositories the project uses and links to appropriate revisions of each git repository, i.e where the upstream repositories reside and where they should be cloned locally. It is the manifest.xml (or default.xml) that determines which Git repositories and revisions repo will manage. This manifest.xml file is hosted in a Git repository along with all the other git repositories.

Credential configuration

Note: it is also recommended to put credentials in .netrc when interacting with the repo.

A sample .netrc file is illustrated below

Downloading Source Code & Building

Downloading Source Code

Following commands fetch the source code using repo tool

$ mkdir <Directory-Name> && cd <Directory-Name>

Please use the following repo init command

$ repo init -u https://user@code.rdkcentral.com/r/manifests -m manifest.xml -b <branch_name>

Examples :

repo init -u https://code.rdkcentral.com/r/manifests -m rdkb.xml -b rdkb-20180527

repo init -u https://code.rdkcentral.com/r/manifests -m rdkb.xml -b master

repo init -u https://code.rdkcentral.com/r/manifests -m rdkb.xml -b morty

$ repo sync -j`nproc` --no-clone-bundle

Building

$ source <setup-environment>

The above step configures and sets up your directory to start an appropriate build.

There are different kinds of builds listed. Please read the options and select the number of the build you need.

1) meta-rdk-bsp-emulator/conf/machine/qemuarmbroadband.conf
2) meta-rdk-bsp-emulator/conf/machine/qemux86broadband.conf
3) meta-rdk-bsp-emulator/conf/machine/qemux86hyb.conf
4) meta-rdk-bsp-emulator/conf/machine/qemux86mc.conf
5) openembedded-core/meta/conf/machine/qemuarm.conf
6) openembedded-core/meta/conf/machine/qemux86-64.conf
7) openembedded-core/meta/conf/machine/qemux86.conf

Next, you need to initiate the build using the following command:

$ bitbake <image-name>

On Successful build, the ROOTFS (in vmdk format) would be available at the following reference location based on the build type :

-$ {HOME}/emulator/build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-image-qemux86broadband-<timestamp>.vmdk

Example :  

…/build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-image-qemux86broadband-20160217080610.vmdk

Host Setup

Refer the section Setting up the Host Environment for host setup details

Build Setup

repo init -u https://code.rdkcentral.com/r/manifests -b dunfell -m rdkv-nosrc.xml
repo sync -j `nproc` --no-clone-bundle --no-tags

Image Build

Media Client

Instruction to build media client image

MACHINE=raspberrypi-rdk-mc source meta-cmf-raspberrypi/setup-environment
bitbake rdk-generic-mediaclient-wpe-image

Hybrid Gateway

Instruction to build hybrid gateway image

MACHINE=raspberrypi-rdk-hybrid source meta-cmf-raspberrypi/setup-environment
bitbake rdk-generic-hybrid-wpe-image

Hybrid Gateway with Operator Ref. App

Instruction to build hybrid gateway image with operator reference application

MACHINE=raspberrypirdkhybrefapp source meta-cmf-raspberrypi/setup-environment
bitbake rdk-generic-hybrid-refapp-image

The generated image resides under the directory build-<MACHINE>/tmp/deploy/images/<MACHINE> of the Yocto workspace

Flash Procedure

The micro SD card should not have any partition while flashing the image. The complete memory of the card should be free

# of - output file (the device file for the inserted micro SD card
bzcat <IMAGE_NAME>-<MACHINE>.wic.bz2 | sudo dd of=/dev/sdb bs=4M iflag=fullblock oflag=direct conv=fsync

Known Issue

• Cobalt is crashed upon launching over RDK Shell

Same as RPI-above section and this can combine and can be made one.

1) Using Burning tool
Keep pressing enter to stop at sc2_hp44h# 
Connect the usb-usb connector and launch Aml_Burn_Tool V3. 
sc2_hp44# run update
Burning tool should show connected. Select image and flash.
2) MfrUtils
Download the image to /data/ path on the device.
mfrUtil -u /data/aml_upgrade_package.img
3) Using firmware update plugin.
Please refer to Firmware Control plugin methods to flash through thunder plugin.
4) USB upgrade
Copy the aml_sdc_burn.ini and image to USB. 
Connect USB to the device and stop the device at the boot prompt. ie sc2_hp44h#
usb_burn aml_sdc_burn.ini
NOTE: Please reach out to Skyworth for aml_sdc_burn.ini

Flashing through xconf :

https://wiki.rdkcentral.com/display/RDK/Firmware+Upgrade+through+XCONF+Server

ToDo: Alanyse what to add from the above link

xz-utils debianutils iputils-ping python3-git python3-jinja2 libegl1-mesa libsdl1.2-dev pylint3 xterm

Configure bash as default command interpreter for shell scripts

sudo dpkg-reconfigure dash

Select “No”
To choose bash, when the prompt asks if you want to use dash as the default system shell - select “No”

Configure Git

Upgrade your Git version to 1.8.x or higher

Once git is installed, configure your name and email using the below commands

# review your existing configuration
git config --list --show-origin

# configure user name and email address
git config --global user.name "John Doe"
git config --global user.email johndoe@example.com

# configure git cookies. Needed for Gerrit to only contact the LDAP backend once.
git config --global http.cookieFile /tmp/gitcookie.txt
git config --global http.saveCookies true

Configure repo

In order to use Yocto build system, first you need to make sure that repo is properly installed on the machine:

# create a bin directory
mkdir ~/bin
export PATH=~/bin:$PATH

# Download the repo tool and ensure that it is executable
curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
chmod a+x ~/bin/repo

 Credential configuration (Only for Amlogic reference board)

Note: it is also recommended to put credentials in .netrc when interacting with the repo.

A sample .netrc file is illustrated below

Below is the major meta-layers specific to Raspberry Pi.

Raspberry Pi major meta-layers structure:

Below is the major meta-layers specific to Amlogic IPSTB

Amlogic major meta-layers structure:

Steps involved in implementing new RDK services Plug-In

RDK components implemented as Thunder plugins are called as RDKServices. it is  developed based on the Thunder (WPE) Framework. Services each other or a particular service can be COMRPC for (communication between plugins) or JSONRPC (for external communication). It has a web-based controller UI.

Reference : https://github.com/rdkcentral/rdkservices/pull/960 

 In RDK services -plugins workspace:

 Cloned from https://github.com/rdkcentral/rdkservices

	$ git clone https://github.com/rdkcentral/rdkservices

Inside PluginName directory

1.  <PluginName>.json : This file contains the plugin's information like schema, information and interface json file.
   1. PluginTemplate.json
2.  CmakeLists.txt:  CMAKE based configuration file which contains a set of directives and instructions describing the project's source files and targets. This is used to compile the Plug-in code to generate the plugin library(Shared library by default; “.so”). External dependencies can be included/linked to the target with the help of CMakeLists.txt configurations.
3. Module.h: This header file includes the support for JSON request, response, logging etc...
4. Module.cpp: This file is used to declare the module name for the Plug-in. This file contains the plugin's information like schema, information and interface json file (defined earlier).
5. <PluginName>.config: This file is used to set configurations of the Plug-in . Ex:- set (autostart true) - Used to make the Plug-in to start automatically along with wpeframework daemon
6. <PluginName>.h :Declare the plugin class in this which should contains all the structures, variables and methods which are needed for plugin implementation. The interface header auto-generated earlier will be used here,
7. <PluginName>.cpp: This class does contains all the definitions for the methods declared in the Plugin.h and those definitions should be defined inside the below namespace.
8. Cmake / (directory) :
     

PluginTemplate/
  ├── CMakeLists.txt
  ├── PluginTemplate.config
  ├── PluginTemplate.cpp
  ├── PluginTemplate.h
  ├── PluginTemplate.json
  ├── Module.cpp
  ├── Module.h
  ├── README.md
  ├── cmake
  |   ├── FindDS.cmake
  │   └── FindIARMBus.cmake
  └── doc
   └── PluginTemplate.md

<PluginName>.json

 This file contains the plugin's information like schema, information and interface json file.

Syntax :

   {
    {
    "$schema": "plugin.schema.json",
    "info": {
    "title": "Plugin Name Plugin",
    "callsign": "PluginName",
    "locator": "libWPEFrameworkPluginName.so",
    "status": "production",
    "description": "The PluginName plugin allows retrieving of various plugin-related information.",
    "version": "1.0"
     },
     "interface": {
    "$ref": "{interfacedir}/PluginName.json#"
     }
   }

eg: PluginTemplate.json

 {
     "locator":"libWPEFrameworkPluginTemplate.so",
     "classname":"PluginTemplate",
     "precondition":[
      "Platform"
     ],
     "callsign":"org.rdk.PluginTemplate",
     "autostart":false
 } 

<PluginName>.config

.config files are files used to configure the parameters and initial settings for some computer programs.

set (autostart false)                       #we are setting autostart condition disable 
set (preconditions Platform) 
set (callsign "org.rdk.PluginTemplate") 	#The callsign name was given to an instance of a plugin. 

#One plugin can be instantiated multiple times. but each instance, the instance-name "callsign" must be unique. here we using org.rdk.PluginTemplate. 

<PluginName>.h

Declare the plugin class in this which should contain all the structures, variables, and methods which are needed for plugin implementation. 

 namespace WPEFramework {
  namespace Plugin {
   
   class PluginName : public PluginHost::IPlugin, public PluginHost::IWeb, public PluginHost::JSONRPC {
   public:
     PluginName()
      : _skipURL(0)
      , _service(nullptr)
      , _subSystem(nullptr)
     {
      RegisterAll();
     }
  
     virtual ~PluginName()
     {
      UnregisterAll();
     }
   }
   ---------------------------------------
   ---------------------------------------
  }
}

eg: PluginTemplate.h

for more information refer PluginTemplate.h 

<PluginName>.cpp

This class does contain all the definitions for the methods declared in the PluginTemplate.h and those definitions should be defined inside the below namespace. 

The plugin should register using service registration MACRO as declared below :

  namespace WPEFramework {
   namespace Plugin {  
    SERVICE_REGISTRATION(Plugin, 1, 0);
    ---------------------------------------
    ---------------------------------------
    ---------------------------------------
   }
  }

 To initialize and deinitialize or activate or deactivate handler for the plugin services :

const string PluginTemplate::Initialize(PluginHost::IShell* /* service */)
	{
	//shared pointer initialized
	//initialize external library
        LOGINFO();
        return (string());
        }
void PluginTemplate::Deinitialize(PluginHost::IShell* /* service */)
        {
 	//shared pointer deinitialized
	//deinitialize external library
        LOGINFO();
        }

eg:

namespace WPEFramework {
    namespace Plugin {  
         SERVICE_REGISTRATION(Plugin, 1, 0);
                
          //registration
          //All the methods declared in Plugin.h should be registered here
                
          //initialize and deinitialize the handlers for the plug-in service
                
          //All the methods declared in Plugin.h should be defined here
                              
    }
} 

CMakeLists.txt

Using the CMake utility this file contains the task needed to be done to make a plug-in. Also contains packages, libraries needed to compile, its path, and other plugin-in configuration option.

This file contains a set of directives and instructions describing the project's source files and targets (executable, library, or both).

set(PLUGIN_NAME PluginTemplate)                          # to set a environment variable set(<variable> <value>)
set(MODULE_NAME ${NAMESPACE}${PLUGIN_NAME})
find_package(${NAMESPACE}Plugins REQUIRED)               # to Finds and loads settings from an external project.

#Adds a library target called <name> to be built from the source files listed in the command invocation. The <name> corresponds to the logical target name and must be globally unique within a project.
add_library(${MODULE_NAME} SHARED
        PluginTemplate.cpp
        Module.cpp
        ../helpers/utils.cpp)

Code flow

• Enable or disable the plug-in flag in the recipe file.
• Add this flag into the main CMakeLists.txt file present in the rdkservice.
• It will invoke CMakeLists file present in the <plugin name>/ (eg: PluginTemplate/CMakeLists.txt).
• When this file started to execute it finds dependencies, packages. it compiled and generate .so file.

To add plugin in rdkservices CMakeLists.txt

In rdkservices directory open CmakeLists.txt :

	$ vi CmakeLists.txt

add these lines ( by default its disabled ) :

    if(PLUGIN_PLUGINTEMPLATE)
    	add_subdirectory(PluginTemplate)
    endif()

 it will invoke your CMakeLists.txt file present in your plugin directory.

Compilation and Install

To include plugintemplate plugin in build sequence, Open rdkservices recipe file and add below line. By default; its configured to be disabled while building rdkservices.

            $ vi meta-rdk-video/recipes-extended/rdkservices/rdkservices_git.bb

PACKAGECONFIG[plugintemplate]      = " -DPLUGIN_PLUGINTEMPLATE=OFF,-DPLUGIN_PLUGINTEMPLATE=ON, "  

To include the plugin in rdkservises build; add the same in packageconfig in rdkservices recipe:

              PACKAGECONFIG += " plugintemplate"

to compile and install in build directory :

	$ bitbake -c compile -f rdkservices

once build complete copy .json, .so file into raspberry Pi.

Copy the Plugin.json (eg: PluginTemplate.json) file to “/etc/WPEFramework/plugins” in raspberry Pi

          Copy the plugin library (libWPEFrameworkPluginTemplate.so) to “/usr/lib/wpeframework/plugins”

so that the controller plugin identify it and list it in the WebUI ( controller UI ).

Controller UI

Controller UI is a web UI that can be launched from a host machine's (machine under the same network where Rpi resides) browser. This UI can be loaded with the Rpi box's IP address with Thunder's port number configured (here). RDKServices uses 9998 as port.

		URL: http://<IP address of the Target device>:9998

Defalut page of Controller UI shall be loaded on web-browser and that will be of Controller tab. Controller tab allows all available plugins to be enabled or disabled.

Image Added

PluginTemplate JSON RPC command

Each RDK Service can be validated through JSON RPC Commands through HTTP. It has a request and response in JSN format.

Note: the argument is case sensitive.

"callsign":"org.rdk.PluginTemplate"

root@raspberrypi-rdk-mc:~# curl http://127.0.0.1:9998/jsonrpc --header "Content-Type: application/json" --request POST --data '{ "jsonrpc":"2.0", "id":3, "method":"Controller.1.activate", "params":{"callsign":"org.rdk.PluginTemplate"} }' 
{"jsonrpc":"2.0","id":3,"result":{"success":true}}root@raspberrypi-rdk-mc:~#
root@raspberrypi-rdk-mc:~#
root@raspberrypi-rdk-mc:~# curl http://127.0.0.1:9998/jsonrpc --header "Content-Type: application/json" --request POST --data '{ "jsonrpc":"2.0", "id":3, "method":"Controller.1.deactivate", "params":{"callsign":"org.rdk.PluginTemplate"} }' 
{"jsonrpc":"2.0","id":3,"result":{"success":true}}root@raspberrypi-rdk-mc:~#
root@raspberrypi-rdk-mc:~#
root@raspberrypi-rdk-mc:~# curl http://127.0.0.1:9998/jsonrpc --header "Content-Type: application/json" --request POST --data '{"jsonrpc":"2.0", "id":3, "method":"org.rdk.PluginTemplate.1.getPluginTemplateStatus"}'
{"jsonrpc":"2.0","id":3,"result":{"connection status from plugin":["CONNECTED"],"success":true}}root@raspberrypi-rdk-mc:~#
root@raspberrypi-rdk-mc:~#
root@raspberrypi-rdk-mc:~# curl http://127.0.0.1:9998/jsonrpc --header "Content-Type: application/json" --request POST --data '{"jsonrpc":"2.0", "id":3, "method":"org.rdk.PluginTemplate.1.getPluginTemplateList"}'
{"jsonrpc":"2.0","id":3,"result":{"Supported plugin list":["plug-A","plug-B","plug-C","plug-D","plug-E"],"success":true}}root@raspberrypi-rdk-mc:~#
root@raspberrypi-rdk-mc:~#
root@raspberrypi-rdk-mc:~# curl http://127.0.0.1:9998/jsonrpc --header "Content-Type: application/json" --request POST --data '{"jsonrpc":"2.0", "id":3, "method":"org.rdk.PluginTemplate.1.getPluginTemplateInfo", "params":{"plugin_name":"plug-A"}}'
{"jsonrpc":"2.0","id":3,"result":{"supportedTvResolutions":["xyz-plugin","no:430HT5"],"success":true}}root@raspberrypi-rdk-mc:~#
root@raspberrypi-rdk-mc:~#
root@raspberrypi-rdk-mc:~# curl http://127.0.0.1:9998/jsonrpc --header "Content-Type: application/json" --request POST --data '{"jsonrpc":"2.0", "id":3, "method":"org.rdk.PluginTemplate.1.getConnectedVideoDisplays"}'
{"jsonrpc":"2.0","id":3,"result":{"connectedVideoDisplays":["HDMI0"],"success":true}}root@raspberrypi-rdk-mc:~#
root@raspberrypi-rdk-mc:~#
root@raspberrypi-rdk-mc:~# curl http://127.0.0.1:9998/jsonrpc --header "Content-Type: application/json" --request POST --data '{"jsonrpc":"2.0", "id":3, "method":"org.rdk.PluginTemplate.1.getConnectedVideoDisplays"}'
{"jsonrpc":"2.0","id":3,"result":{"connectedVideoDisplays":[],"success":true}}root@raspberrypi-rdk-mc:~#
root@raspberrypi-rdk-mc:~#

OUT OF PROCESS Plugin

Here the plugin is developed as out of process, which runs as a separate thread from WPEFramework. Services each other or a particular service can be COMRPC ( for communication between plugins) or JSONRPC (for external communication). it has a web-based controller UI.

Inside PluginName directory

OutOfProcessPlugin/
  ├── CMakeLists.txt
  ├── OutOfProcessPlugin.config
  ├── OutOfProcessPlugin.cpp
  ├── OutOfProcessPlugin.h

  ├── OutOfProcessPluginJsonRpc.cpp
  ├── OutOfProcessPlugin.json
  ├── Module.cpp
  ├── Module.h
  ├── OutOfProcessPlugin.md

<PluginName>.json

 This file contains the plugin's information like schema, information and interface json file. Here the outofprocess will be true, which indicates that the plugin run as a seperate process.

 eg: OutOfProcessPlugin.json

{

 "locator":"libWPEFrameworkOutOfProcessPlugin.so",

 "classname":"OutOfProcessPlugin",

 "precondition":[

  "Platform"

 ],

 "autostart":true,

 "configuration":{

  "root":{

   "outofprocess":true

  }

 }

}

<PluginName>.config

.config files are files used to configure the parameters and initial settings for some computer programs.

Here outofprocess is set to true, to make plugin as out of process plugin.

set (autostart true)

set (preconditions Platform)

map()

    kv(outofprocess true)

end()

ans(rootobject)


<PluginName>.h

Declare the plugin class in this which should contain all the structures, variables, and methods which are needed for plugin implementation. 

 namespace WPEFramework {

  namespace Plugin {

   class PluginName : public PluginHost::IPlugin, public PluginHost::IWeb, public PluginHost::JSONRPC {

   public:

     PluginName()

      : _skipURL(0)

      , _service(nullptr)

      , _subSystem(nullptr)

     {

      RegisterAll();

     }

     virtual ~PluginName()

     {

      UnregisterAll();

     }

   }

   ---------------------------------------

   ---------------------------------------

  }

}

<PluginName>.cpp

This class does contain all the definitions for the methods declared in the Plugin.h and those definitions should be defined inside the below namespace. 

The plugin should register using service registration MACRO as declared below :

 namespace WPEFramework {

   namespace Plugin { 

    SERVICE_REGISTRATION(Plugin, 1, 0);

    ---------------------------------------

    ---------------------------------------

    ---------------------------------------

   }

  }


To initialize and deinitialize or activate or deactivate handler for the plugin services :

const string OutOfProcessPlugin::Initialize(PluginHost::IShell* /* service */)

    {

    //shared pointer initialized

    //initialize external library

        LOGINFO();

        return (string());

        }

void OutOfProcessPlugin::Deinitialize(PluginHost::IShell* /* service */)

        {

    //shared pointer deinitialized

    //deinitialize external library

        LOGINFO();

        }

Process handler plugin services to receive request and sent responses based on the services :

Core::ProxyType<Web::Response> OutOfProcessPlugin::Process(const Web::Request &request)

{

  Core::ProxyType<Web::Response> result(PluginHost::IFactories::Instance().Response());




  //Handle the service request and send the responses

  -----------------

  -----------------

  return result;

}


eg: refer OutOfProcessPlugin.cpp

<PluginNameJsonRpc>.cpp>

The PluginNameJsonRpc file contains the registration for methods and properties which are declared in PluginName.h

namespace WPEFramework {

    namespace Plugin {  

          //registration

         void OutOfProcessPlugin::RegisterAll()

          {

               // methods and properties declared in Plugin.h are registered here

                  -------------------

                  ------------------- 

          }

         void OutOfProcessPlugin::UnregisterAll()

         {

         }                        

    }

} 

CMakeLists.txt

Using the CMake utility this file contains the task needed to be done to make a plug-in. Also contains packages, libraries needed to compile, its path, and other plugin-in configuration option.

This file contains a set of directives and instructions describing the project's source files and targets (executable, library, or both).

set(PLUGIN_NAME OutOfProcessPlugin)                          # to set a environment variable set(<variable> <value>)

set(MODULE_NAME ${NAMESPACE}${PLUGIN_NAME})

find_package(${NAMESPACE}Plugins REQUIRED)               # to Finds and loads settings from an external project.




#Adds a library target called <name> to be built from the source files listed in the command invocation. The <name> corresponds to the logical target name and must be globally unique within a project.

add_library(${MODULE_NAME} SHARED

    OutOfProcessPlugin.cpp

    OutOfProcessPluginJsonRpc.cpp

    Module.cpp)

The Code flow, Compilation and Install steps are similar to the PluginTemplate.

The last step,

Copy the Plugin.json (eg: OutOfProcessPlugin .json) file to “/etc/WPEFramework/plugins” in Raspberry Pi

          Copy the plugin library (libWPEFrameworkOutOfProcessPlugin.so) to “/usr/lib/wpeframework/plugins”

so that the controller plugin identify it and list it in the WebUI ( controller UI ).

Controller UI

• Inside PluginName directory

Controller UI is a web UI that can be launched from a host machine's (machine under the same network where Rpi resides) browser.

URL: http://<IP address of the Target device>:9998

Image Added

OutOfProcessPlugin JSON RPC command

Each RDK Service can be validated through JSON RPC Commands through HTTP. It has a request and response in JSON format.

Note: the argument is case sensitive.

"callsign":"OutOfProcessPlugin"

RDK components implemented as Thunder plugins are called as RDKServices. It is developed based on the Thunder (WPE) Framework. Services each other or a particular service can be COMRPC ( for communication between plugins) or JSONRPC (for external communication).i.e.

COMRPC is used to communicate between the plugins (out of process) or to communicate for larger data.



JSONRPC is used to fetch/update info to or from plugins externally (most of the plugins provide this in interface, similar to ReST API) also it can be used from applications.

JSONRPC:

For instance please see below Bluetooth plugin's pair method with JSONRPC interface.

Events

Parameters

Result

{
    "jsonrpc": "2.0",
    "id": 42,
    "method": "org.rdk.Bluetooth.1.pair",
    "params": {
        "deviceID": "61579454946360"
    }
}

{
    "jsonrpc": "2.0",
    "id": 42,
    "result": {
        "success": true
    }
}

For more details please refer : https://github.com/rdkcentral/rdkservices/blob/sprint/2107/Bluetooth/doc/BluetoothPlugin.md#pair-method

The corresponding implementation in ThunderJS is given below:

   this.thunderJS.call('org.rdk.Bluetooth', 'pair', { deviceID: deviceIDval },
 
      (err, result) => {
 
        if (err) {
 
          Log.info('\n Bluetooth Pair error' + JSON.stringify(err))
 
        } else {
 
          Log.info('Pairing success' + JSON.stringify(result))
 
        }
 
      }
 
    )

To know more about how to implement JSONRPC inerface using ThunderJS in JS environment please see https://github.com/rdkcentral/ThunderJS/blob/master/readme.md

ThunderJS is used to make easy to make API calls to Thunder (WPEframework) over a Websocket connection. ThunderJS can also be used to listen to (and act upon) notifications broadcasted by Thunder. ThunderJS is an isomorphic library, which means it can be used in a browser environment as well as a NodeJS environment.

Lightning is a Javascript TV app development framework based on NodeJS environment. So ThunderJS can be easily integrated to the Lightning apps.

Adding ThunderJS dependency to package.json

ThunderJS dependencies can be added manually to the lightning projects by adding ‘"ThunderJS": "github:rdkcentral/ThunderJS",’ to the package.json under ‘devDependencies’ and then run ‘npm install’.

OR

ThunderJS can be installed into your project via NPM command. Then the package.json will be updated with the thunder dependency "npm install github:rdkcentral/ThunderJS"

Snippet of package.json is given below .To use the ES6 syntax, we need add the Babel dependency also.

  }
},
"devDependencies": {
 "@babel/core": "^7.7.2",
 "ThunderJS": "github:rdkcentral/ThunderJS",
 "babel-eslint": "^10.0.3",
 "dashjs": "^3.1.3",
 "eslint": "^6.6.0",
 "eslint-config-prettier": "^6.7.0",
 "eslint-plugin-prettier": "3.1.1",
 "hls.js": "^0.13.2",
 "husky": "^3.1.0",
 "lint-staged": "^9.4.3"
 "prettier": "^1.19.1"
  }
}