RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
Yocto Build Steps
repo init -u https://code.rdkcentral.com/r/manifests -b rdk-next -m rdkv-nosrc.xml repo sync -j `nproc` --no-clone-bundle --no-tags
Image Build
# choose mediaclient machine configuration on setup MACHINE=raspberrypi-rdk-mc source meta-cmf-raspberrypi/setup-environment # generic MC image build bitbake rdk-generic-mediaclient-wpe-image
Flashing Procedure
The image file will be generated under build-<MACHINE>/tmp/deploy/images/<MACHINE> directory
# Insert the micro SD card and mention the card's device file name # input file (if) is the image file to flash and the output file (of) is the card's device file name sudo dd if=rdk-generic-mediaclient-wpe-image-raspberrypi-rdk-mc.rpi-sdimg of=/dev/<sd file> bs=4M
Supported Service Status
| S.No | Supported Plugins | Total Test Cases | PASS Count | FAIL Count | Not Tested |
|---|---|---|---|---|---|
| 1 | Controller menu | 1 | 1 | 0 | 0 |
| 2 | Device Info | 1 | 1 | 0 | 0 |
| 3 | HTML App | 1 | 1 | 0 | 0 |
| 4 | Location Sync | 1 | 1 | 0 | 0 |
| 5 | Messenger | 1 | 0 | 1 | 0 |
| 6 | Monitor | 1 | 0 | 1 | 0 |
| 7 | OCDM | 1 | 0 | 1 | 0 |
| 8 | Player Info | 1 | 0 | 1 | 0 |
| 9 |
ResidentApp |
1 | 1 | 0 | 0 |
| 10 |
SearchandDiscoveryApp |
1 | 1 | 0 | 0 |
| 11 | Trace Control | 1 | 1 | 0 | 0 |
| 12 |
Cobalt |
3 | 3 | 0 | 0 |
| 13 |
LightningApp |
30 | 28 | 2 | 0 |
| 14 |
WebKitBrowser |
1 | 1 | 0 | 0 |
| 15 | com.comcast.StateObserver | 1 | 0 | 1 | 0 |
| 16 | org.rdk.AVInput | 4 | 1 | 3 | 0 |
| 17 | org.rdk.ActivityMonitor | 5 | 2 | 3 | 0 |
| 18 |
org.rdk.Bluetooth |
21 | 0 | 2 | 19 |
| 19 | org.rdk.Continue Watching | 4 | 0 | 1 | 3 |
| 20 | org.rdk.dataCapture | 3 | 1 | 1 | 1 |
| 21 | org.rdk.DisplaySettings | 61 | 30 | 5 | 26 |
| 22 | org.rdk.FrameRate | 5 | 4 | 1 | 0 |
| 23 | org.rdk.HdcpProfile | 3 | 2 | 1 | 0 |
| 24 | org.rdk.HdmiInput | 6 | 2 | 4 | 0 |
| 25 | org.rdk.LoggingPreferences | 3 | 2 | 1 | 0 |
| 26 | org.rdk.Network | 14 | 5 | 7 | 2 |
| 27 | org.rdk.RDKShell | 30 | 5 | 5 | 20 |
| 28 | org.rdk.StateObserver NEW | 7 | 0 | 7 | 0 |
| 29 | org.rdk.ScreenCapture | 2 | 1 | 1 | 0 |
| 30 | org.rdk.System | 43 | 22 | 18 | 3 |
| 31 | org.rdk.Timer | 7 | 6 | 1 | 0 |
| 32 | org.rdk.UserPreferences | 3 | 2 | 1 | 0 |
| 33 | org.rdk.Warehouse | 7 | 4 | 2 | 1 |
| 34 | org.rdk.Wifi | 17 | 15 | 2 | 0 |
| 35 | org.rdk.Xcast | 4 | 2 | 2 | 0 |
| 36 | FirmwareControl NEW | 1 | 1 | 0 | 0 |
| Total | 296 | 146 | 75 | 75 | |
Known Issues
- If no internet connection to the box (either through Ethernet or Wifi), no Switcher App UI displayed on the TV output
- The on-screen console is visible on UI's App/page transition
- As the RDK Reference (Resident) App's script has 45 seconds of sleep function, it will be elapsed for this time after bootup to display the UI.
- In BT plugin is not working.
- Press "xfinity" button from RCU to exit the "Youtube" application. Youtube UI get overlapped with rest of the switcher apps.
- In switcher App, "About" options is not launching
Image Build
Generic Hybrid Image
# choose hybrid machine configuration MACHINE=raspberrypi-rdk-hybrid source meta-cmf-raspberrypi/setup-environment # Generic hybrid image build bitbake rdk-generic-hybrid-wpe-image
Flashing Procedure
The image file will be generated under build-<MACHINE>/tmp/deploy/images/<MACHINE> directory
# Insert the micro SD card and mention the card's device file name # input file (if) is the image file to flash and the output file (of) is the card's device file name sudo dd if=rdk-generic-hybrid-wpe-image-raspberrypi-rdk-hybrid.rpi-sdimg of=/dev/<sd file> bs=4M
Supported Service Status
| S.No | Supported Plugins | Total Test Cases | PASS Count | FAIL Count | Not Tested |
|---|---|---|---|---|---|
| 1 | Controller menu | 1 | 1 | 0 | 0 |
| 2 | Device Info | 1 | 1 | 0 | 0 |
| 3 | HTML App | 1 | 1 | 0 | 0 |
| 4 | Location Sync | 1 | 1 | 0 | 0 |
| 5 | Messenger | 1 | 0 | 1 | 0 |
| 6 | Monitor | 1 | 0 | 1 | 0 |
| 7 | OCDM | 1 | 0 | 1 | 0 |
| 8 | Player Info | 1 | 0 | 1 | 0 |
| 9 |
ResidentApp |
1 | 1 | 0 | 0 |
| 10 |
SearchandDiscoveryApp |
1 | 1 | 0 | 0 |
| 11 | Trace Control | 1 | 1 | 0 | 0 |
| 12 |
Cobalt |
3 | 3 | 0 | 0 |
| 13 |
LightningApp |
30 | 28 | 2 | 0 |
| 14 |
WebKitBrowser |
1 | 1 | 0 | 0 |
| 15 | com.comcast.StateObserver | 1 | 0 | 1 | 0 |
| 16 | org.rdk.AVInput | 4 | 1 | 3 | 0 |
| 17 | org.rdk.ActivityMonitor | 5 | 2 | 3 | 0 |
| 18 |
org.rdk.Bluetooth |
21 | 0 | 2 | 19 |
| 19 | org.rdk.Continue Watching | 4 | 0 | 1 | 3 |
| 20 | org.rdk.dataCapture | 3 | 1 | 1 | 1 |
| 21 | org.rdk.DisplaySettings | 61 | 30 | 5 | 26 |
| 22 | org.rdk.FrameRate | 5 | 4 | 1 | 0 |
| 23 | org.rdk.HdcpProfile | 3 | 2 | 1 | 0 |
| 24 | org.rdk.HdmiInput | 6 | 2 | 4 | 0 |
| 25 | org.rdk.LoggingPreferences | 3 | 2 | 1 | 0 |
| 26 | org.rdk.Network | 14 | 5 | 7 | 2 |
| 27 | org.rdk.RDKShell | 30 | 5 | 5 | 20 |
| 28 | org.rdk.StateObserver NEW | 7 | 0 | 7 | 0 |
| 29 | org.rdk.ScreenCapture | 2 | 1 | 1 | 0 |
| 30 | org.rdk.System | 43 | 22 | 18 | 3 |
| 31 | org.rdk.Timer | 7 | 6 | 1 | 0 |
| 32 | org.rdk.UserPreferences | 3 | 2 | 1 | 0 |
| 33 | org.rdk.Warehouse | 7 | 4 | 2 | 1 |
| 34 | org.rdk.Wifi NEW | 17 | 15 | 2 | 0 |
| 35 | org.rdk.Xcast | 4 | 2 | 2 | 0 |
| 36 | FirmwareControl NEW | 1 | 1 | 0 | 0 |
| Total | 296 | 146 | 75 | 75 | |
Known Issues
- If no internet connection to the box (either through Ethernet or Wifi), no Switcher App UI displayed on the TV output
- Wifi connection is not established.
- The on-screen console is visible on UI's App/page transition
- As the RDK Reference (Resident) App's script has 45 seconds of sleep function, it will be elapsed for this time after bootup to display the UI.
- In BT plugin is not working.
- Press "xfinity" button from RCU to exit the "Youtube" application. Youtube UI get overlapped with rest of the switcher apps.
- In switcher App, "About" options is not launching
Functional Test Report
Please refer to the below link for the System Test report.
Overview
Community Forums
Content Tools
Tasks