RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
<work in progress>
Data available partially
Basic skills expected, relevant RDK links,hardware requirements etc
Data available partially
build VM, pre requisites etc. for Dunfell builds
RPI 3B/3B+ Model Reference Platform
This manual describes the rdk-generic-broadband-image build procedure for Yocto 3.1 builds. This will upgrade the default build system used in RDKB, from morty(2.2) to dunfell(3.1). In addition to upgrades to opensource packages, Yocto 3.1 also contain Long term Support release feature. The current version lacks the variety of features available in the dunfell. The upgraded build tools will be used to generate rdk-generic-broadband-image for Raspberrypi reference platform.
Yocto 3.1 Upgradation support the following:
Each component in RDK is a standalone repository with its own individual build tools producing a library or set of binaries. When we upgrade the OE layers to the newer versions, we need to make necessary changes in the RDK layers which use these components, to avoid build failures.
The OpenEmbedded build system should be able to run on Ubuntu 18.04 distribution/other compatible linux distribution with the following versions for Git, tar, and Python.
Note: You should also have about 50 Gbytes of free disk space for building images.
The essential packages you need for a supported Ubuntu or Debian distribution are shown in the following command:
|
In order to use Yocto build system, the repo tool must be properly installed on the machine.
To install Repo make sure you have a /bin directory in your home directory and that it is included in your path
Repo Setup Steps
|
Note: it is also recommended to put credentials in ~/.netrc when interacting with repo.
A sample ~/.netrc file is illustrated below
.netrc
|
To build, follow below instructions
Build Steps
|
Following command can be used to flash the RPI image to sd card using linux machine . bmap tool should be available in linux
Flash command
|
No | Feature | Supported |
---|---|---|
No | Feature | Supported |
1 | LAN Connected Devices-Ethernet | |
2 | WAN Connected Devices-Wi-Fi | |
3 | Parental Control | |
4 | Firewall settings | |
5 | Advanced Config: Port Triggering | |
6 | Advanced Config: Port Forwarding | |
7 | Advanced Config: Remote Management | |
8 | Advanced Config: DMZ | |
9 | Xfinity Wi-Fi 2.4/5 GHz – Public Hotspot | |
10 | Test and Diagnostics | |
11 | Local WebUI Configuration | |
12 | Factory Reset | |
13 | DHCP /Reserved IP | |
14 | EthWan | |
15 | Eth Agent | |
16 | 2.4 GHz Band Support | |
17 | 5 GHz Band Support | |
18 | Bridge Mode Support | |
19 | Persistent Storage Management | |
20 | WebPA for Comcast,community | |
21 | Lost and Found | |
22 | Bluetooth | |
22 | Harvester Support | |
23 | TR-69 | |
24 | SNMP | |
27 | Boot time data measurement | |
28 | Wireless Protection Setup(WPS) | |
29 | Captive Portal | |
30 | Wi-Fi MAC Filtering | |
31 | Log Rotation Support | |
32 | Firmware Upgrade Support | |
33 | Multiboot Support | |
34 | Telemetry Support | |
35 | IPV6 | |
36 | Log level control through CcspLogAgent | |
37 | Band Steering using RSSI | |
38 | Backup and Restore | |
39 | SelfHeal | |
40 | Password-Reset | |
41 | WebUI JST |
Data available partially
build VM, pre requisites etc. for Dunfell builds
Data available
Basic build commands
Data available
Basic build commands
Data available partially
Current flash image steps + screenshots
Data available partially
Current flash image steps + screenshots
Data not available
Explain layer structures in RDK-V build.Refers both Rpi & Ref platform
Data not available
Check whether the Thunder plugin template earlier created and shared by team is sufficient for this.
Data not available
Explain how to develop based on the Thunder plugin template
Data not available
Thunder Interfaces, COMRPC
Data not available
ThunderJS